Eureka Cordless Vacuums Right Now Babyliss Pro 5000 Get It Now!
Sunday, December 18, 2011
Thursday, December 15, 2011
Milwaukee Contractor Bag Review
This review is for the Milwaukee contractor's bag that came in the V28 Combo kit model number 0928-29. You can also buy this tool bag separately which is model number 48-55-3530. When first looking at the bag you will notice that it is rather large, which is good. The dimensions are 24.53 L x 133 W x 143 H. This bag is made out of 600 denier material, so it is water resistant, not water proof which you don't want for power tool storage. Never buy an tool bag that is water proof, because your tools will not be able to breath. If your tools can not breath, the moisture will eat away at your tools.
One aspect we liked a lot was all the pockets. On the outside there are plenty of pockets to store hand tools for easy access. The outside also has two hand straps to carry the bag or one large shoulder strap. Once you open the Milwaukee contractor bag, you will notice the large amount of room that fits the Combo, with room left over for other items. On the inside of the tool bag, there are even more pockets to store items. This is a nice feature, now instead of all your tools at the bottom of the bag, you can easily access them. With all the tools from the kit plus any additional hand tools you will be putting in the bag, you might look at a weight of 50lbs. at most. So for our test we wanted to over load the bag and see what happens.
For our power tool test of the Milwaukee contractor bag, we loaded the bag with 2-50lb. salt bags. As a user, I am not sure anyone will be walking around with 100lbs. of tools in this bag, but it would be nice to know if it can handle this amount of weight. After we loaded the bag with this weight, we just picked it off the ground and moved it up and down to make sure the bottom didn't break or the handles didn't snap. We weren't sure, but the bag was fine and held up. Now some might say why didn't you swing the bag around and try to get it to break. Our response is if you can easily swing around 100lbs of power tools or have the need to do this, you might want to think about joining the Olympic weight lifting team!
Friday, December 2, 2011
Bare-Tool Milwaukee 0725-20 28 Volt 4-1/2-Inch Grinder/Cut-Off Tool (Tool Only, No Battery)
!±8±Bare-Tool Milwaukee 0725-20 28 Volt 4-1/2-Inch Grinder/Cut-Off Tool (Tool Only, No Battery)
Brand : MilwaukeeRate :
Price : $181.38
Post Date : Dec 03, 2011 04:58:22
Usually ships in 24 hours
With a 28V motor and M28TM lithium-ion battery (not included), the Milwaukee Cordless Grinder/Cutoff Tool delivers the speed and power needed for fast grinding and cutting applications. The overload protection and soft start features extend tool life for extreme durability while providing a compact, lightweight solution without surrendering features or durability. Wheel Diameter (in.): 4 1/2, Speed (RPM): 8,000, Switch Type: Slide On Switch, Spindle Thread Size: 5/8in.-11, Spindle Lock: Yes, Side Handle: Yes, Wheel Included: Yes Grinder/Cutoff tool only 28V motor Soft start with slide-on switch Large spindle lock for quick wheel replacement Overload protection prevents overheating Uses M28 Li-Ion battery (not included), which provides up to 75 cuts of 1/2in. threaded rod 5-position guard allows quick tool-free adjustment Fuel gauge indicates remaining run time
Subscribe to:
Posts (Atom)
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |